# No DMARC record found: what it means and the 10-minute fix

A checker says your domain has no DMARC record. What that means, why it happens even after you add one, and the exact starter record to publish.

Canonical URL: https://dmarcdone.com/blog/no-dmarc-record-found | Published: 2026-10-05

"No DMARC record found" means your domain publishes no DMARC record at `_dmarc.example.com`, the one place receivers look for it. The fix is one TXT record with `p=none` and a reporting address. It takes about ten minutes and changes nothing about how your email is delivered.

If you already added a record and still see the message, the usual causes are below, followed by the exact starter record.

## What the message means

DMARC stands for Domain-based Message Authentication, Reporting and Conformance. It is a short text record in your domain's DNS (the Domain Name System, the internet's address book) that tells receiving mail servers two things:

1. What to do with email that claims to come from your domain but fails authentication.
2. Where to send reports about the mail they see using your domain.

The record lives at `_dmarc.example.com`, as a TXT record that starts with `v=DMARC1`. The DMARC standard sets that location. The standard is now RFC 9989, published in May 2026, which replaced the original RFC 7489.

When a checker says "no DMARC record found", it means it asked DNS for a TXT record at `_dmarc.example.com` and got nothing back that starts with `v=DMARC1`.

## Why it matters

Without a DMARC record, receiving servers have no instruction from you. Anyone can put your domain in the From line of an email, and nothing you published tells Gmail or Outlook to treat that mail with suspicion.

You also get no reports. That means you cannot see which services send mail as your domain, which of them pass authentication, and whether someone else is impersonating you.

Big mailbox providers have also started to ask for DMARC. Since February 2024, Google's sender guidelines require anyone sending more than 5,000 messages a day to Gmail accounts to publish a DMARC record (a policy of `none` is enough). Yahoo set the same rule for bulk senders at the same time, and Microsoft requires it from domains that send 5,000 or more messages a day to Outlook.com and its other consumer services. A small business is usually below those thresholds. The big inboxes expect DMARC all the same.

Microsoft documents how it handles a missing record. When there is no DMARC record for the From domain, Microsoft 365 shows `dmarc=bestguesspass` in the message headers, which means it guessed. Its own troubleshooting table gives the fix: "Publish an explicit DMARC record."

## Why it says "not found" even after you added a record

If you are sure you added a record and the checker still finds nothing, one of these is usually the cause:

- **The host name was doubled.** Many DNS panels add your domain automatically. If you typed `_dmarc.example.com` into such a panel, the record may now live at `_dmarc.example.com.example.com`. In most panels you type only `_dmarc`. To test for this, run the step 4 commands with `_dmarc.example.com.example.com` (your domain twice): if the record answers there, delete it and add it again with just `_dmarc`.
- **You edited DNS in the wrong place.** Your domain may be registered at one company while its DNS is hosted at another (for example, registered at [GoDaddy](https://dmarcdone.com/guides/godaddy) but using [Cloudflare](https://dmarcdone.com/guides/cloudflare) name servers). Only the DNS host's records count.
- **The record type is wrong.** DMARC must be a TXT record, not a CNAME or a "SPF" type record.
- **The value does not start with `v=DMARC1`.** A missing `v=`, a lowercase `dmarc1` or extra text in front of it makes receivers ignore the record.
- **There are two DMARC records.** If there are two TXT records at `_dmarc` that both start with `v=DMARC1`, the original DMARC specification (RFC 7489) tells receivers to stop and apply no DMARC at all. Keep exactly one.
- **It has not propagated yet.** DNS changes are often visible within minutes, but caches can hold the old answer for the record's TTL (time to live). If the TTL was long, give it an hour or two.

## The 10-minute fix

### Step 1: Create a mailbox for reports (2 minutes)

Pick an address that will receive DMARC reports, such as `dmarc-reports@example.com`. Make it a real mailbox, alias or group so the reports are not bounced. Microsoft recommends a dedicated mailbox or group for this, not a person's main inbox, because reports arrive as compressed XML attachments every day.

### Step 2: Open your DNS settings (3 minutes)

Log in to the company that hosts your DNS. If you are not sure who that is, [look your domain up in our free checker](https://dmarcdone.com/#check): it shows your DNS host and links to the matching guide. Or ask DNS for your domain's name servers, with your own domain in place of `example.com`:

```text
dig +short NS example.com
```

On Windows, use `nslookup -type=NS example.com` instead. On 6 October 2026, example.com itself answered with `hera.ns.cloudflare.com.` and `elliott.ns.cloudflare.com.`, so its DNS is at Cloudflare. At the five DNS hosts we have guides for, you type only `_dmarc` in the record's name field, without your domain:

| DNS host and guide | Name servers end in | Field name |
|---|---|---|
| [GoDaddy](https://dmarcdone.com/guides/godaddy) | `domaincontrol.com` | Name |
| [Cloudflare](https://dmarcdone.com/guides/cloudflare) | `ns.cloudflare.com` | Name |
| [IONOS](https://dmarcdone.com/guides/ionos) | `ui-dns.com`, `ui-dns.de`, `ui-dns.org`, `ui-dns.biz` | Host name |
| [STRATO](https://dmarcdone.com/guides/strato) | shown under NS-Record in your STRATO login | Präfix |
| [Namecheap](https://dmarcdone.com/guides/namecheap) (BasicDNS) | `registrar-servers.com` | Host |

### Step 3: Add one TXT record (3 minutes)

Add a new record with these values:

```text
Type:  TXT
Host:  _dmarc
Value: v=DMARC1; p=none; rua=mailto:dmarc-reports@example.com; fo=1
TTL:   1 hour (3600), or your panel's default
```

Replace `example.com` with your own domain in the `rua` address. If your DNS panel asks for the full name instead of just `_dmarc`, enter `_dmarc.` followed by your domain, for example `_dmarc.example.com`. The table in step 2 names the field at each common host, and our [DNS host guides](https://dmarcdone.com/guides) walk through each panel.

### Step 4: Check it (2 minutes)

Wait a few minutes, then run the [free DMARC record check](https://dmarcdone.com/#check) again. You should see a DMARC record with policy `none`.

To check from a terminal instead, ask DNS for the TXT record at `_dmarc`, with your own domain in place of `example.com`:

```text
dig +short TXT _dmarc.example.com
```

```text
nslookup -type=TXT _dmarc.example.com
```

We ran both on macOS, which includes them. Windows includes `nslookup`. What the answer means, as printed on macOS on 6 October 2026:

- **The record is live** if dig prints a line in quotes that starts with `v=DMARC1`, or nslookup prints a `text =` line holding it. For example.com itself, dig printed `"v=DMARC1;p=reject;sp=reject;adkim=s;aspf=s"`. With the starter record, you would see `"v=DMARC1; p=none; rua=mailto:dmarc-reports@example.com; fo=1"`.
- **There is no record** if dig prints nothing, or nslookup prints `*** Can't find _dmarc.example.com: No answer` (no TXT record at that name) or `** server can't find _dmarc.example.com: NXDOMAIN` (the name does not exist in DNS).

On Windows, Microsoft's documentation names the same two failures "No records" and "Nonexistent domain". If the record is missing, remember that caches can keep the old answer for a while (see the propagation point above), so wait and try again before changing anything.

## What each part of the starter record does

- `v=DMARC1` identifies the record as DMARC. It must come first.
- `p=none` is the policy. It tells receivers to take no special action on mail that fails. Nothing about your delivery changes, which is why this is the safe first step.
- `rua=mailto:...` is where aggregate reports go. These are daily summaries from receivers listing which servers sent mail as your domain, how many messages, and whether they passed.
- `fo=1` asks for a failure report whenever SPF or DKIM fails, rather than only when both fail. It only has an effect if you also add a `ruf=` address for failure reports, and many large providers do not send failure reports at all (Microsoft 365, for example, does not). It is harmless to include and saves an edit later.

The record has no `pct` tag. Under RFC 7489 it defaulted to 100 percent anyway, and RFC 9989 has dropped it from the standard, so there is no reason to add it.

## If your reports go to another domain

If the `rua` address is on a different domain from the one you are protecting (for example, a reporting service), the receiving domain has to publish a small authorization record, or receivers will not send the reports. This check was defined in RFC 7489, section 7.1. Reporting services handle this on their side, so you normally do not need to do anything. If you point reports at your own domain, it does not apply.

## Before and after you publish

DMARC builds on two older checks:

- **SPF** (Sender Policy Framework) lists the servers allowed to send mail for your domain.
- **DKIM** (DomainKeys Identified Mail) adds a cryptographic signature to each message.

A message passes DMARC when at least one of them passes and matches the domain in the From address. You can publish the DMARC record before SPF and DKIM are perfect, because `p=none` does not block anything. But you should fix SPF and DKIM before you move to a stricter policy. The free checker shows the status of all three.

## What comes next

A `p=none` record is a starting point that protects nothing on its own. Scanners will stop saying "no DMARC record found" and start saying "DMARC policy not enabled". Our post on [what "DMARC policy not enabled" means](https://dmarcdone.com/blog/dmarc-policy-not-enabled) explains why.

The path from here:

1. Read the aggregate reports for two to four weeks and list every service that sends mail as you.
2. Make each legitimate service pass SPF or DKIM with your domain.
3. Move to `p=quarantine`, then `p=reject`. Our [quarantine vs reject explainer](https://dmarcdone.com/blog/dmarc-quarantine-vs-reject) covers the safe order.

Reading the XML reports and chasing down every sender is what our [guided DMARC enforcement](https://dmarcdone.com/pricing) covers: one fee per domain, and a full refund under our [refund conditions](https://dmarcdone.com/legal/refunds) if your domain is not at `p=reject` within 60 days.

## Sources

- RFC 9989, Domain-Based Message Authentication, Reporting, and Conformance (DMARC): https://www.rfc-editor.org/rfc/rfc9989.html
- RFC 7489, DMARC (obsoleted by RFC 9989), sections 6.3, 6.6.3 and 7.1: https://www.rfc-editor.org/rfc/rfc7489.html
- IANA DMARC Tag Registry (pct marked historic): https://www.iana.org/assignments/dmarc-parameters
- Microsoft Learn, Set up DMARC to validate email in Microsoft 365: https://learn.microsoft.com/en-us/defender-office-365/email-authentication-dmarc-configure
- Google, Email sender guidelines: https://support.google.com/mail/answer/81126
- Yahoo Sender Hub, Sender best practices: https://senders.yahooinc.com/best-practices/
- Microsoft Support, Fix NDR error 550 5.7.515 in Outlook.com (high-volume sender requirements): https://support.microsoft.com/en-us/outlook/fix-ndr-error-550-5-7-515-in-outlook-com
- Our own DNS queries on 6 October 2026 from macOS: `dig +short NS example.com`, `dig +short TXT _dmarc.example.com` and `nslookup -type=TXT` against 1.1.1.1, for the outputs shown in steps 2 and 4
- Microsoft Learn, nslookup (Windows commands, error messages): https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/nslookup
- GoDaddy, How to check DNS and diagnose common issues (domaincontrol.com name servers): https://www.godaddy.com/resources/skills/how-to-check-dns-and-diagnose-common-issues
- GoDaddy Help, Add a TXT record (Name field): https://www.godaddy.com/help/add-a-txt-record-19232
- Cloudflare Docs, Nameservers (standard nameservers on ns.cloudflare.com): https://developers.cloudflare.com/dns/nameservers/
- Cloudflare Docs, DNS record types (Name field): https://developers.cloudflare.com/dns/manage-dns-records/reference/dns-record-types/
- IONOS Help, Default DNS settings for IONOS domains (ui-dns name servers): https://www.ionos.com/help/domains/general-information-about-dns-settings/default-dns-settings-for-11-ionos-domains/
- IONOS Help, Configuring a DMARC record for a domain (Host name field): https://www.ionos.com/help/domains/configuring-mail-servers-and-other-related-records/configuring-a-dmarc-record-for-a-domain/
- STRATO FAQ, Wie kann ich bei STRATO meine DNS-Einträge verwalten? (NS-Record, Präfix): https://www.strato.de/faq/domains/wie-kann-ich-bei-strato-meine-dns-eintraege-verwalten/
- Namecheap Knowledgebase, What is your BasicDNS? (registrar-servers.com name servers): https://www.namecheap.com/support/knowledgebase/article.aspx/923/10/what-is-your-basicdns/
- Namecheap Knowledgebase, How do I add TXT/SPF/DKIM/DMARC records for my domain? (Host field): https://www.namecheap.com/support/knowledgebase/article.aspx/317/2237/how-do-i-add-txtspfdkimdmarc-records-for-my-domain/
